COLOR SELECTION - GUIDE TO SENERGY  STUCCO

 

Senergy offer 128 standard colors in official color selection chart . (Due to individual computer display restrictions, colors shown on this web site may not precisely reproduce the Senergy stucco colors applied on the wall surface.)

The color and texture selection should not be used for final choice. Authentic color and texture selection should be made from an example completed by the applicator using the same tools, techniques and supplies planned for the actual project.

 

SENERGY COLOR SELECTION
Standard colors -except for Charcoal Grey- have a sunlight radiation reflectance value (LRV) greater than 20%. The use of dark colors (LVR less than 20%) is not recommended with EIF system.

The Senergy color palette selection is as broad as your imagination. It can recreate almost any color using a spectrophotometer to match any supplied sample. In combination with the variety of textures available Senergy has an unlimited range of finishes to choose from.

Systems that include expanded polystyrene (EPS).
EPS has a constant service temperature restriction of approximately 160ºF (71ºC).
The use of dark colors in some climate environments could result in EPS temperatures that surpass this maximum value. Design Professionals should consult the Senergy Technical Service to evaluate the choice of colors selected for particular projects.

Metallic Color Coat

Factory-mixed, 100% acrylic polymer coating

standard metalic color chart
BASF wall system metalic
BASF wall system metalic 2

Applying Metallic Color Coat creates the dynamic appearance of a metallic surface, boosts energy efficiency and provide a distinctive metal panel look over surfaces prepared with BASF SKIM COAT in BASF EIFS, BASF CEMENT-BOARD STUCCO, all BASF surfacing systems and interior coating plaster or gypsum wallboard applications.

Metallic Color Coat is available in  15 standard colors and many custom colors.

COVERAGE

Approximately 1000 sqft. for the first coat, 1200 sqft. for the second coat and 1400 sqft. if a third coat is needed. Coverage of the materials varies depending upon the texture of the surface over which it is being applied.

 

PACKAGING

(40 lbs. per 5-galon)